Triumph Stag Distributors

Fitting new top plate with electronic ignition module.

1, Remove the old timing plate, and advance unit.

2, Push the new wires though the hole in the side of the distributor,

3, Bolt in the new timing plate complete.

4, Undo the two screws holding the ignition module, lift the unit up,

5, Refit the Vacuum advance unit, refit the ignition module making sure that the pin fits in the hole in the advance unit lever.

6, Connect the Red wire to the ignition side of the coil and the Black to the Negative.

To see a list of all the parts we can supply for your Stag please click here